不透鋼1.4313是馬氏體級，耐結垢高，熱加工工作后耐用度性好。X3CrNiMo13-4鋼的物理化耐熱性是因此物理物質中鉬和鎳的高含磷量。這類硬質合金修改劑限止了曾加級碳含磷量的需用——給定鹽濃度很大于奧氏體不透鋼。現在鎳含磷量低，但鎳含磷量約為4%，可觀改善了鋼對很多結垢環保的忍受力——兩次物理化耐熱性。X3CrNiMo13-4鋼用戶組可生產加工制造更是高達300℃在壞境溫度下崗位的配件上的和配件上的，各類展現在很多結垢環保中的配件上的，此外保持穩定至少的漆層前提條件括抗氯化物物理性質)。QT650.QT780和QT900前提條件下，熱加工工作后最經常交盤工字鋼。半原料應用在油氣生產加工制造.化工類.在冶金行業領域和電力節能環保行業領域，增壓機展現在高溫文爾雅溫度下.泵.減少機零件。鋼身體不適焊接方法。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50生產EN1.4313馬氏體不銹鋼板體現了滲碳特點（+A）程序、蘸火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，要哪這個一定程度要跟保險業務說明白哦。